|
||||||||||
|
|
ApolloCyprus (Greek)
About the Development
APOLLO a delightful project of 14 detached and semi detached houses, and 4 semi detached bungalows. Build on the outskirts of the village and yet within walking distance to all amenities, (shops, bank, post office, chemist, bus stop, e.t.c.).Most of the house and bungalows have a car port and optional swimming pools. Some of the houses are attached to 688sq meters of green area.
Apollo project is building on the north- west of the village and consist of 18 properties. Five detached houses of 3 bedrooms. Five detached house of 2 bedrooms. Four semi detached houses of 2 bedrooms. Four semi detached bungalows of 2 bedrooms. All the properties includes kitchen units wardrobes, granite worktop, double glaze windows, provision for air conditions and C/H, marble steps and pressurized system. Most of the house includes guest toilet and en suite bedroom, walk-in closet and optional swimming pool. Skeleton StructureThe skeleton of the building is of a reinforced concrete, frame structure designed on the basis of the stringiest code of strictest practice for earthquake rules and regulations. The foundations are also of reinforced concrete type and the result of a soil investigation whereby the ground bearing capacity is established. The structure is designed based on B.S. – CYP Code of Practice for framed concrete structures and the steel reinforcement is in compliance to E.U. standards and requirements. WallsThe external cladding walls are 200mm and built in hollow clay bricks. All internal partition walls are also of the same type but 100mm thick. The walls are covered in three coats of smooth finish plaster internally and three coats externally. Painting or any other type of finish on the external surface will be applied as entailed in the Architectural drawings and details. Walls and Ceiling FinishesInternal wall surface will receive three coats of emulsion paint. External wall surface will receive two coats of external paint or special weatherproof finishing agent according to the Architect’s instructions. All ceiling finishes will receive two coats of spatula and three coats of paint. All walls in bathrooms and toilet will be fitted with ceramic tiles from finished floor to door frame height, at purchase price of CYP 7.00/m². Floor Finishes
Bathrooms and toilets: ceramic tiles @ purchase price of CYP 7.00/m² All other internal areas: ceramic tiles @ purchase price of CYP 7.00/m² Sanitary Units
Sanitary units and fitting will be in accordance with the drawings. CarpentryThe external door will be of aluminum and double glazed windows.
Electrical InstallationElectrical installation will be done in accordance with the drawings and approved by E.A.C. The following are included.
Plumbing Installation And Hot and Cold Water SupplyPlumbing and drainage installation will be done in accordance with the drawing. All hot and cold water recirculation will be done with a “pipe-in-pipe” system using propelanium pipes E.U. origin. Each dwelling will have its own solar-thermal unit for provision of hot water. Air ConditionProvision will be made with all necessary electrical and mechanical piping, ready to receive “split unit” air conditioners in all bedrooms and living-room area. General NoteThe customer has the discretion of choosing all the above in any colour he want. Within the price range mentioned above.
|
currency converter1.00 = 0.00
Live Rates as of 30-11--0001 07:0 GMT
|
||||||||
|
Copyright © IPB Holdings Ltd. All Rights Reserved
Designed & Developed by AED Information Systems
|
||||||||||